Titanium alloy Grade 7 Ti-0.2Pd Wire

1.Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent.
2.Size: Φ1.0mm~Φ7mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent.

Standard Specification: ASTM B863, ASME SB863, ISO, DIN AWS A5.16 (ERTi-7);

Standard	Werkstoff No.	UNS
Titanium Alloy Grade7 Ti-0.2Pd	3.7235	R52400

Technical Data Sheet

`Chemical Composition
Weight %	Ti	Pd	C	Fe	N	O	H
Titanium Alloy Grade7 Ti-0.2Pd	Balance	0.12~0.25	0.08	0.3	0.03	0.25	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Alloy Grade7 Ti-0.2Pd

345

275

Titanium alloy Grade 7 Ti-0.2Pd Wire

Product Details

Related Products

Commercial Pure Titanium Grade 4 Wire

Titanium and Titanium alloy Mesh

Titanium Alloy Grade 36 Ti45-Nb

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Wire