Commercial Pure Titanium Grade 1 Wire

1.Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and
cold formability.
2.The material has high impact toughness and is readily weldable.
3.Size: Φ0.1mm~Φ7mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of deep drawing.

Standard Specification: ASTM B863, ASME SB863, ASTM F67, ISO, DIN AMS-T-9046 CP4 / AMS 4940;

Standard	Werkstoff No.	UNS
Commercial Pure Titanium Grade1	3.7025	R50250

Technical Data Sheet

Chemical Composition
Weight %	Ti	C	Fe	N	O	H
Titanium CP Grade 1	Balance	0.08	0.02	0.03	0.15	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Grade 1

240

138

Products Show

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Wire

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interst

Medical Titanium and Titanium alloy Wire

1. Titanium wire for Neurosurgery Implants Kirschner Wire Specification (mm) Φ0.8mm, Φ1.0mm, Φ1.5mm; Φ2.0mm; Φ2.5mm; Φ3.0mm; Φ3.5mm; Φ4.0mm Length (mm) 1000~3000

Titanium alloy Grade 9 Ti-3Al-2.5V Wire

Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular prod

Commercial Pure Titanium Grade 3 Wire