SEOUL GEUMYANG NEW MATERIALS COMPNAY LIMITED

Featured Products

GEUMYANG specializing in the Production of

Titanium and Titanium Alloy End Caps

Standards ASTM B363 - ASME SB363 ;ASME B16.25 ;ASME B16.28 ;MSS SP-43 Dimensions Outside

Titanium tubes for Aerospace and Airplane

Listed in the following table are some of the common sizes produced for major aircraft companies. Sizes other than those shown can be produced depending on the quantity required. SEAMLESS T

Titanium and Titanium Alloy Reducers

Types Concentric |Eccentric seamless or welded Standards ASTM B363 - ASME SB363 ;ASM

Titanium alloy Ti-6Al-4V Powder

Titanium and Titanium alloy powder Powder characteristics: the powder has high sphericity, smooth surface, few satellite balls, low oxygen content, uniform particle size distribution, good fluidity an

Zirconium forging Ring

Zirconiumforging Ring have such as AISI B16.5 Ring for Weld neck Ring, Threaded and Screwed Ring, Slip on Ring, Socket Weld Ring, Lap joint Ring, Blind Ring. Meanwhile, have EN-1092 Ring TYPE 01

Zirconium Forging Flanges

Zirconium Flange have such as AISI B16.5 Flanges for Weld neck Flanges, Threaded and Screwed Flanges, Slip on Flanges, Socket Weld Flanges, Lap joint Flanges, Blind Flanges. Meanwhile, have EN-1092 F

Zirconium Reactor for Wastewater Treatment

GOOLEE can provide all kinds ofZirconium Reactor for Wastewater Treatment; GOOLEE have almost all kinds of Zirconium Reactor for Wastewater Treatment manufacture and design qualifications.

Zirconium Tube And Shell Heat Exchanger

GOOLEE can provide all kinds of Zirconium Tube And Shell Heat Exchanger GOOLEE have almost all kinds of pressure vessels' manufacture and design qualifications. We are qualified supplier fo

Tantalum Niobium Alloy Products

Tantalum Niobium alloy targets:（Ta-3Nb、Ta-20Nb、Ta-30Nb、Ta-40Nb） 1. Tantalum Niobium alloy rotating targets：Diameter（25-400）mm×Thickness(3-28)mm 2. 1. Tantalum Niobium alloyPlanetargets：Thic

Tantalum Tungsten Alloy Products

Tantalum tungsten alloy targets:（Ta-2.5W、Ta-7.5W、Ta-10W） 1. Tantalum Tungsten alloy rotating targets：Diameter（25-400）mm×Thickness(3-28)mm 2. 1. Tantalum Tungsten alloyPlanetargets：Thickness

Tantalum crucible and processing parts

Content % Tantalum Grade Main Composition The impurity content is not more than

Tantalum and Tantalum Sheet and Plate

1. Specification: RO5200，RO5400，RO5252(Ta-2.5W)，RO5255(Ta-10W) 2. Standard:ASTM B 708; 3. Size Type Thickness(mm) Width(mm)

Niobium Zirconium Alloys Products

NbZr1 Sheet and Plate Size NbZr1 Thickness（mm） Width（mm） Length（mm） Foil 0.03-0

Niobium crucible and processing parts

Niobium is an off-white metal with a melting point of 2468°C, a boiling point of 4742°C, and a density of 8.57 g/cm3. Niobium is stable in the air at room temperature, and is not completely oxidized w

Niobium and Niobium Alloys Sheet and Plate

1. Specification: RO4200-1，RO4210-2 2. Standard:ASTM B393-18 3. Size Type Thickness(mm) Width(mm) Lengt

Niobium and Niobium Alloys Rod and Wire

1. Specification: RO4200-1，RO4210-2 2. DiameterSize:Φ0.3mm~Φ100mm; 3. Standard:ASTM B 392 -18 4. Chemical Composition Chemical Compositions

Company News

TiZrNb ROUND SOLID Bar

GEUMYANG has been exported TiZrNb ROUND SOLID Bar for Medical use Order size is in millimeters (not inch) Titanium =47.1% - Zirconium =37.6% -Niobium=15.3% Element ration tolerances +-0.5% 3.1
2021-08-18
Graphite plate Thickness5mm×Width400mm×Length500mm

GEUMYANG has been exported Graphite plate Thickness5mm×Width400mm×Length500mm, 5 Pieces Clients of Asian research institutions are used in the power electronics industry.
2021-04-07
Application Of Titanium And Titanium Alloys In C919

The C919 developed by COMAC is China's first single-aisle trunk aircraft independently developed in accordance with international advanced airworthiness standards and mainstream market standards. It h
2021-04-02

SEOUL GEUMYANG NEW MATERIALS COMPNAY LIMITED

is An import and export enterprise established in Seoul, South Korea.

The founder of the company has a deep business background in China and South Korea, so he can provide non-ferrous metal materials such as chemical powders and chemicals (titanium, zirconium, tantalum, niobium, copper, aluminum, nickel based alloys, stainless steel and soft magnetic alloys, etc.), various materials for scientific research and other required products and materials for South Korea and the world.