Commercial Pure Titanium Grade 1 Bar and Rod

1.Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability.
2.The material has high impact toughness and is readily weldable.
3.Size: Φ7mm~Φ230mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of deep drawing.

Standard Specification: ASTM B348, ASME SB348, ASTM F67, ISO, DINAMS-T-9046B CP4

AMS 4940 MIL-T-9046J CP4

Standard	Werkstoff No.	UNS
Commercial Pure Titanium Grade1	3.7025	R50250

Technical Data Sheet

Chemical Composition
Weight %	Ti	C	Fe	N	O	H
Titanium CP Grade 1	Balance	0.08	0.02	0.03	0.15	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Grade 1

240

138

Titanium Alloy Grade 12 Ti-0.3Mo-0.8Ni Bar and Rod

Titanium Alloy Grade 12 is lightly alloyed near-alpha alloy offering improved strength at elevated temperatures and optimum ASME Code design allowables. The material is readily weldable, and

Titanium alloy Grade 9 Ti-3Al-2.5V Bar and Rod

Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular pro

Titanium alloy Grade 7 Ti-0.2Pd Bar and Rod

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, incl

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Bar and Rod