Commercial Pure Titanium Grade 4 Wire

1.Titanium Alloy Grade 4 is “unalloyed” titanium offering improved strength, moderate ductility. The material is readily weldable.
2.This material is very corrosion resistant in highly oxidizing and mildly reducing environments.
3.Size: Φ0.1mm~Φ7mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 4 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of deep drawing.

Standard Specification: ASTM B863, ASME SB863, ASTM F67, ISO, DIN AMS-T-9046 CP4 / AMS 4940;

Standard	Werkstoff No.	UNS
Commercial Pure Titanium Grade4	3.7065	R50700

Technical Data Sheet

Chemical Composition
Weight %	Ti	C	Fe	N	O	H
Commercial Pure Titanium Grade4	Balance	0.08	0.5	0.05	0.4	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Commercial Pure Titanium Grade4

550

483

Titanium alloy Grade 9 Ti-3Al-2.5V Wire

Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular prod

Commercial Pure Titanium Grade 2 Wire

Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosi

Medical Titanium and Titanium alloy Wire

1. Titanium wire for Neurosurgery Implants Kirschner Wire Specification (mm) Φ0.8mm, Φ1.0mm, Φ1.5mm; Φ2.0mm; Φ2.5mm; Φ3.0mm; Φ3.5mm; Φ4.0mm Length (mm) 1000~3000

Titanium Alloy Grade5 Ti-6Al-4V Wire