Titanium and Titanium Alloys_SEOUL GEUMYANG NEW MATERIALS COMPNAY LIMITED

Titanium Alloy Grade 12 Ti-0.3Mo-0.8Ni Foil

Titanium Grade 12 is similar to Grade 2 and Grade 3 except Grade 12 has the addition of Mo and Ni. These additions to Grade 12 offer a lower cost option than the Palladium bearing grades. Grade 12 ha

Titanium Alloy Grade7 Ti-0.2Pd Foil

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, incl

Titanium Alloy Grade23 Ti-6Al-4VELI ( Extra low interstitials) Foil

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low inters

Ti 15V-3Cr-3Sn-3Al (Ti 15333)

Titanium alloys are divided into alpha alloys, near-alpha alloys, alpha and beta alloys, and beta alloys. Grade Ti 15V 3Cr 3Al 3Sn alloy is a beta alloy that can be strip-rolled and heat-treated. It

Titanium Forging Flanges

Titanium Flange have such as AISI B16.5 Flanges for Weld neck Flanges, Threaded and Screwed Flanges, Slip on Flanges, Socket Weld Flanges, Lap joint Flanges, Blind Flanges. Meanwhile, have EN-1092 Fl

Titanium forging shaft for petroleum equipment

Products Name Titanium forging shaft for petroleum equipment. Specification Φ85mm×Length1300mm Material

Titanium forging Ring

Titaniumforging Ring have such as AISI B16.5 Flanges for Weld neck Flanges, Threaded and Screwed Flanges, Slip on Flanges, Socket Weld Flanges, Lap joint Flanges, Blind Flanges. Meanwhile, have E

Titanium Forging Disc

Titanium Disc are made 99.99% Titanium pure metal material Ti sputter target and Titanium alloy disc for sale. The surface is clean and smooth without peeling, folding, pores, cracks and other d

1.Titanium and Titanium Alloy Elbows

Types 90° & 45° seamless or welded Standards ASTM B363 - ASME SB363 ;ASME B16.25 ;ASM

2.Titanium and Titanium Alloy Tees

Types equal & reducing seemless/welded Standards ASTM B363 - ASME SB363 ASME B16.9 AS

Titanium and Titanium Alloy Reducers

Types Concentric |Eccentric seamless or welded Standards ASTM B363 - ASME SB363 ;ASM

Titanium and Titanium Alloy End Caps

Standards ASTM B363 - ASME SB363 ;ASME B16.25 ;ASME B16.28 ;MSS SP-43 Dimensions Outside