Any Demands please contact us feel free!
Cellphone： +82-10-3146-3890
Fax: +82- 0504-238-1624
E-mail: geumyangmaterials@naver.com
Toggle Navigation

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Bar and Rod

1.Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plusbeta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI).
2.The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required.
3.Size: Φ7mm~Φ230mm;
Products Inquiry

Product Details

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important.

Standard Specification: ASTM B348 ASME SB348, AMS 4928, ASTM F136, ISO, DINAWS A5.16 (ERTi-23)

 

Standard

Werkstoff No.

UNS

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

3.7165

R56407

 

Technical Data Sheet

Chemical Composition

Weight %

Ti

Al

V

C

Fe

N

O

H

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

Balance

5.5~6.5

3.5~4.5

0.08

0.25

0.03

0.13

0.0125

 

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

120

828

110

759

7.5H,6.0I

25

H: For Product section or wall thickness values＜1.0 in.;

I: For product section or wall thickness values≥1.0 in.; 

Related Products

Commercial Pure Titanium Grade 1 Bar and Rod

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of de

Medical Titanium and Titanium alloy Bar and Rod

1. TitaniumRodfor Neurosurgery Implants KirschnerRod   Specification (mm) Φ7mm~Φ230mm Length (mm) 1000~3000

Titanium Alloy Grade 36 Ti45-Nb Bar and Rod

Standard Specification: ASTM B348, ASME SB348,  ISO, DINAWS A5.16 (ERTi-36);   Standard Werkstoff No. UNS Titanium Al

Titanium Alloy Grade 12 Ti-0.3Mo-0.8Ni Bar and Rod

Titanium Alloy Grade 12 is lightly alloyed near-alpha alloy offering improved strength at elevated temperatures and optimum ASME Code design allowables. The material is readily weldable, and