Commercial Pure Titanium Grade 2 Bar and Rod

1.Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility.
2.The material has good toughness and is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reducing environments.
3.Size: Φ7mm~Φ230mm;

Products Inquiry

CompanyName * :

Email * :

Name :

Tel :

Message :

Product Details

Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance

of strength and ductility. The material has good toughness and is readily

weldable. This material is very corrosion resistant in highly oxidizing and

mildly reducing environments.

Standard Specification: ASTM B348, ASME SB348, ASTM F67 Surgical Implant, ISO, DIN AMS-T-9046B CP3 AMS 4902 MIL-T-9046J CP

Standard	Werkstoff No.	UNS
Commercial Pure Titanium Grade2	3.7035	R50400

Technical Data Sheet

Chemical Composition
Weight %	Ti	C	Fe	N	O	H
Commercial Pure Titanium Grade2	Balance	0.08	0.3	0.03	0.25	0.015

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Commercial Pure Titanium Grade2

345

275

Titanium alloy Grade 9 Ti-3Al-2.5V Bar and Rod

Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular pro

Titanium alloy Grade 7 Ti-0.2Pd Bar and Rod

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, incl

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Bar and Rod

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low inters

Titanium Alloy Grade5 Ti-6Al-4V Bar and Rod