Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of deep drawing.
Standard Specification: ASTM B265 , ASME SB265, ASTM F67, AMS-T-9046B CP4 AMS 4940 MIL-T-9046J CP4;
Standard |
Werkstoff No. |
UNS |
Commercial Pure Titanium Grade1 |
3.7025 |
R50250 |
Technical Data Sheet
Chemical Composition |
||||||
Weight % |
Ti |
C |
Fe |
N |
O |
H |
Titanium CP Grade 1 |
Balance |
0.08 |
0.02 |
0.03 |
0.15 |
0.015 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Titanium Grade 1 |
35 |
240 |
20 |
138 |
24 |
30 |
GOOLEETitanium and Steel Clad can not only meet the requirements of mechanical properties, but also save costs and improve economic benefitsStandard Specification: ASTM B265 , ASME SB265